| Peer-Reviewed

Numerical Analysis of Dry Excavation Using a Tie Back Wall Under Static and Dynamic Load

Received: 21 July 2015     Accepted: 3 August 2015     Published: 12 August 2015
Views:       Downloads:
Abstract

Deep excavations are common in urban areas, nearby existing constructions. The support systems have the main function of preserve the stability and control soil displacements close to the excavation. Settlement control of nearby structures is an essential aspect during design and construction. Settlements prediction is usually made by empirical methods and in some cases also by numerical modeling. The paper presents a numerical modeling of a dry excavation by Plaxis program. The program allows the prediction of stress and deformation behavior of different geotechnical constructions using the Finite Element Method. The excavation has been modeled in five stages, in order to reproduce the construction phases. The numerical modeling was capable to reproduce satisfactorily the horizontal profile of the displacements of the diaphragm wall. In relation to settlements, the shape of the settlement profile was quite similar

Published in American Journal of Optics and Photonics (Volume 3, Issue 5)
DOI 10.11648/j.ajop.20150305.12
Page(s) 58-64
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Deep Excavations, Settlements, Stress, Numerical Modeling, Plaxis

References
[1] Alves, M. C. M. 1982. Estudo da Estabilidade de Valas Escoradas por Equilíbrio –Limite e Pelo Método dos Elementos Finitos.
[2] Brinkgreve, R. B. J. 2002. Finite Element code for Soil an Rock Analyses – PLAXIS – 2D user’s manual. Rotterdam,
[3] EAB (1994). Empfehlungen des Arbeitskreises „Baugruben“. 3. Auflage, Verlag Ernst & Sohn, Berlin.
[4] Hsieh, P. G., Ou, C. Y. 1998. Shape of Ground Surface Settlement Profiles Caused by Excavation, Canadian Geotechnical Journal, vol.35, p.1004-1017.
[5] Jucá, J. F. T. 1981. Influência de Escavações nos Recalques em Edificações Vizinhas, Tese de Mestrado, COPPE-UFRJ, Rio de Janeiro, Brasil.
[6] Nendza, H., Klein, K. (1974). “Bodenverformung beim Aushub tiefer Baugruben“. Straße Brücke Tunnel 9; pp. 231.
[7] O´Rourke, T. D. 1981. Ground Movements Caused by Braced Excavations, Journal of the Geotechnical Engineering Division, ASCE, vol.107, nº.GT9, p. 1159-1178.
[8] PLAXIS (1998). “Finite element code for soils and rocks“. PLAXIS, A.A. Balkema, Rotterdam
[9] Potts, D. M., Fourie, A. B. 1984. The Behaviour of a Propped Retaining Wall: Results of a Numerical Experiment, Géotechnique, vol.34, nº.3, p. 383-404.
[10] Stroh, D. (1974). “Berechnung verankerter Baugruben nach der Finite Elemente Methode“. Mitteilungen der Versuchsanstalt für Bodenmechanik und Grundbau, TH Darmstadt, Heft 13.
[11] Ulrichs, K.R. (1981). “Untersuchungen über das Trag- und Verformungsverhalten verankerter Schlitzwände in rolligen Böden“. Die Bautechnik, pp. 142. Tese de Mestrado, COPPE-UFRJ, Rio de Janeiro, Brasil. Netherlands, Balkema.
Cite This Article
  • APA Style

    Masih Allahbakhshi, Amir Allahbakhshi. (2015). Numerical Analysis of Dry Excavation Using a Tie Back Wall Under Static and Dynamic Load. American Journal of Optics and Photonics, 3(5), 58-64. https://doi.org/10.11648/j.ajop.20150305.12

    Copy | Download

    ACS Style

    Masih Allahbakhshi; Amir Allahbakhshi. Numerical Analysis of Dry Excavation Using a Tie Back Wall Under Static and Dynamic Load. Am. J. Opt. Photonics 2015, 3(5), 58-64. doi: 10.11648/j.ajop.20150305.12

    Copy | Download

    AMA Style

    Masih Allahbakhshi, Amir Allahbakhshi. Numerical Analysis of Dry Excavation Using a Tie Back Wall Under Static and Dynamic Load. Am J Opt Photonics. 2015;3(5):58-64. doi: 10.11648/j.ajop.20150305.12

    Copy | Download

  • @article{10.11648/j.ajop.20150305.12,
      author = {Masih Allahbakhshi and Amir Allahbakhshi},
      title = {Numerical Analysis of Dry Excavation Using a Tie Back Wall Under Static and Dynamic Load},
      journal = {American Journal of Optics and Photonics},
      volume = {3},
      number = {5},
      pages = {58-64},
      doi = {10.11648/j.ajop.20150305.12},
      url = {https://doi.org/10.11648/j.ajop.20150305.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajop.20150305.12},
      abstract = {Deep excavations are common in urban areas, nearby existing constructions. The support systems have the main function of preserve the stability and control soil displacements close to the excavation. Settlement control of nearby structures is an essential aspect during design and construction. Settlements prediction is usually made by empirical methods and in some cases also by numerical modeling. The paper presents a numerical modeling of a dry excavation by Plaxis program. The program allows the prediction of stress and deformation behavior of different geotechnical constructions using the Finite Element Method. The excavation has been modeled in five stages, in order to reproduce the construction phases. The numerical modeling was capable to reproduce satisfactorily the horizontal profile of the displacements of the diaphragm wall. In relation to settlements, the shape of the settlement profile was quite similar},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Numerical Analysis of Dry Excavation Using a Tie Back Wall Under Static and Dynamic Load
    AU  - Masih Allahbakhshi
    AU  - Amir Allahbakhshi
    Y1  - 2015/08/12
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ajop.20150305.12
    DO  - 10.11648/j.ajop.20150305.12
    T2  - American Journal of Optics and Photonics
    JF  - American Journal of Optics and Photonics
    JO  - American Journal of Optics and Photonics
    SP  - 58
    EP  - 64
    PB  - Science Publishing Group
    SN  - 2330-8494
    UR  - https://doi.org/10.11648/j.ajop.20150305.12
    AB  - Deep excavations are common in urban areas, nearby existing constructions. The support systems have the main function of preserve the stability and control soil displacements close to the excavation. Settlement control of nearby structures is an essential aspect during design and construction. Settlements prediction is usually made by empirical methods and in some cases also by numerical modeling. The paper presents a numerical modeling of a dry excavation by Plaxis program. The program allows the prediction of stress and deformation behavior of different geotechnical constructions using the Finite Element Method. The excavation has been modeled in five stages, in order to reproduce the construction phases. The numerical modeling was capable to reproduce satisfactorily the horizontal profile of the displacements of the diaphragm wall. In relation to settlements, the shape of the settlement profile was quite similar
    VL  - 3
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • Department of Civil Engineering, Mazandaran University of Technology, Babol, Iran

  • Department of Mechanical Engineering, Arak University, Arak, Iran

  • Sections